CODIA TITAN 80 Titanium Metal Isolation Pads
Titanium flagship vibration isolation system
Designed for 50–150 kg extra‑heavy components (e.g., heavy power amplifiers, floor‑standing speakers). Uses an integrated aviation‑grade titanium main body + composite viscoelastic layers and dual damping structure to thoroughly block and decouple transmitted vibrations, eliminating common low‑frequency contamination in high‑power systems. Per‑foot load capacity and isolation performance substantially exceed conventional isolation pads — an ultimate solution for heavy system vibration control.
Core technical breakdown
-
Titanium alloy main body
-
Uses Grade 5 titanium alloy (Ti‑6Al‑4V) — monolithic formed, hardness HV350+
-
Low natural frequency characteristic: fundamental resonance ~8 Hz (well below the audible low end of 20 Hz)
-
80 mm diameter provides an industry‑leading contact area of 62.4 cm²
-
-
Overload / high capacity design
Pressure test conditions Performance Static load capacity per foot 150 kg (no permanent deformation) Dynamic shock (simulated speaker slam) Instantaneous 300 kg energy absorption
Practical application guidance
Speaker spike replacement: remove stock spikes and place TITAN 80 at the corners beneath the cabinet
Secondary isolation recommendation: use 3–4 feet per component; pair with an electronic spirit level for precise horizontal adjustment
Strengthening the equipment rack top board: support the four corners with the feet to suppress frame‑borne resonance transmission
Specification
| Item | Parameters |
|---|---|
| Diameter | 80mm |
| Thickness | 22.5mm |
| Unit weight: | 640 g (±5 g) |
| Material | Grade 5 titanium alloy + composite viscoelastic damping layer |
| Maximum load | 150 kg / each (a single unit can support extra‑heavy equipment such as large amplifiers or loudspeakers) |
